How to get to Renaissance Baltimore Harborplace Hotel from the airports

The closest airport is Baltimore/Washington International Thurgood Marshall Airport (BWI), about 8 miles from Renaissance Baltimore Harborplace Hotel (202 E Pratt St). From BWI you can take the Light Rail or Maryland Transit trains to downtown (Camden Station/Convention Center), or use a taxi or rideshare to reach the hotel's Inner Harbor entrance.
In this guide
- Arriving at Baltimore/Washington International (BWI)
- From Ronald Reagan Washington National (DCA) and Dulles (IAD)
- Smaller / regional airports: Martin State and others
- Getting from Camden Station / Convention Center to the hotel
- Taxi, rideshare, shuttles and on-site parking
- Practical tips and contacts on arrival
Arriving at Baltimore/Washington International (BWI)
BWI is the primary airport serving the hotel and is the most direct airport option for most visitors. Ground and rail connections serve downtown Baltimore and the Inner Harbor.
Rail option: take the Baltimore Light Rail from BWI to the downtown stop serving the Inner Harbor area, or use the Maryland Transit (train) service that calls at Camden Station/Camden Yards; both get you close to the hotel’s Inner Harbor promenade entrance.
- Light Rail: board at BWI and ride to the downtown/Convention Center or Camden-area stop, then walk toward 202 E Pratt St.
- MARC/Commuter train: Maryland Transit services run to Camden Station — check schedules for frequency (service about every 30 minutes on some routes).
- Taxi/rideshare: available at BWI curbside; tell the driver you are going to Renaissance Baltimore Harborplace Hotel, 202 E Pratt St (Inner Harbor).
| Option | What to expect |
|---|---|
| Light Rail | Direct rail link from BWI to downtown; short walk from downtown stop to the hotel |
| MARC/Commuter Train | Service to Camden Station/Camden Yards; then walk or take a short local connection to the hotel |
| Taxi / Rideshare | Curbside pickup at BWI; drop-off at the hotel’s Inner Harbor entrance |

From Ronald Reagan Washington National (DCA) and Dulles (IAD)
DCA and IAD are farther from downtown Baltimore than BWI. Both airports offer ground-transport options including shuttle, bus connections, trains, and taxis/rideshare to Baltimore.
If you arrive at DCA or IAD, you can reach downtown Baltimore by intercity rail (Amtrak) from the Washington area or by regional bus/coach services — then use local transit, a short taxi/rideshare, or the Charm City Circulator to reach the Inner Harbor.
- Amtrak/MARC: trains run between Washington stations and Baltimore Penn Station; from Penn Station you can walk, take Light Rail, or use a short local hop to the hotel.
- Intercity bus/coach: check operators and schedules that serve Baltimore; then transfer to local transit or taxi/rideshare for the final leg.
- Taxis/rideshare: available at DCA and IAD for direct transfer to the Inner Harbor area.
| Airport | Typical transfer method to downtown Baltimore |
|---|---|
| Ronald Reagan Washington National (DCA) | Amtrak/MARC to Baltimore or direct taxi/rideshare |
| Washington Dulles (IAD) | Amtrak via Washington-area station, bus/coach services, or taxi/rideshare |
Smaller / regional airports: Martin State and others
Martin State Airport and other regional fields serve some private or regional flights. These airports can be useful for private-charter or some regional connections.
From regional airports you will generally need a taxi/rideshare or arranged ground transfer to reach downtown Baltimore and then the Inner Harbor promenade where the hotel sits.
- Arrange a taxi or prebook a shuttle/transfer to downtown Baltimore.
- Once in the Inner Harbor area, walk to 202 E Pratt St or ask the driver to drop you at the hotel's Inner Harbor entrance.
- If you need car rental, most airports have rental desks — the hotel offers on-site covered parking for a surcharge.
| Airport | Typical final-leg options |
|---|---|
| Martin State Airport | Taxi/rideshare or prebooked ground transfer |
| Other regional airports | Taxi/rideshare, private transfer, or rental car |
Getting from Camden Station / Convention Center to the hotel
Camden Station/Camden Yards and the Baltimore Convention Center are both within easy walking distance of the hotel. The property sits on the Inner Harbor promenade at 202 E Pratt St, and the ground floor opens into Harborplace.
If you arrive by train or Light Rail, follow signs toward the Inner Harbor/Harborplace and the hotel’s street address. The hotel’s Inner Harbor entrance is the most direct pedestrian access point.
- From Camden Station: walk toward the Inner Harbor/Harborplace and head to 202 E Pratt St.
- From the Convention Center: follow the promenade toward Harborplace; the hotel is adjacent to the waterfront shopping pavilion.
- If you have lots of luggage, consider a short taxi/rideshare drop-off at the hotel’s entrance.
| Arrival point | How to reach the hotel |
|---|---|
| Camden Station (train) | Walk toward the Inner Harbor and Harborplace to reach 202 E Pratt St |
| Baltimore Convention Center | Follow the Inner Harbor promenade to the hotel’s waterfront entrance |

Taxi, rideshare, shuttles and on-site parking
Taxis and rideshare services operate throughout the Baltimore metro area and provide direct drop-off at the hotel's Inner Harbor entrance. Curbside pickup is standard at the area airports.
The hotel offers on-site covered parking (self and valet options) for a daily surcharge; if you plan to rent a car at the airport, confirm height restrictions and in/out privileges with the hotel.
- Tell drivers the full address: Renaissance Baltimore Harborplace Hotel, 202 E Pratt St, Baltimore, MD 21202.
- If using a rental car, the hotel’s covered parking is available for a surcharge and includes an electric car charging station and wheelchair-accessible parking.
- For group arrivals, ask BookResorts agents (24/7) at +1 (888) 605-1350 about arranging town car or limo service.
| Option | Note |
|---|---|
| Taxi / Rideshare | Curbside pickup at airports; direct drop-off at the hotel |
| Hotel Parking | On-site covered parking for a surcharge; check height limits and rates |
| Limo / Town Car | Available by arrangement; contact the hotel or BookResorts agents |

Practical tips and contacts on arrival
When you contact drivers or plan a rail transfer, use the hotel address (202 E Pratt St) and note the hotel is on the Inner Harbor promenade near Harborplace and the National Aquarium. If you need assistance on arrival, the hotel can be reached via BookResorts agents 24/7 at +1 (888) 605-1350.
Check rail schedules before you travel: Light Rail and Maryland Transit timetables change by season and day of week. If you have mobility needs, the hotel and many transit options offer accessible entries — ask both the carrier and the hotel in advance.
- Confirm Light Rail and Maryland Transit schedules before you travel.
- If you require an accessible transfer (ramp, lift, or wheelchair-accessible vehicle), request it when booking ground transport and inform the hotel if you need accessible drop-off.
- If you plan to eat after arrival, Watertable Restaurant and The Ground Floor Café are on-site — check their current hours with the hotel.
| Hotel contact | Use for |
|---|---|
| BookResorts agents | +1 (888) 605-1350 — 24/7 assistance and booking questions |
| Hotel address | 202 E Pratt St, Baltimore, Maryland, 21202 — give to drivers and transit info |


